HomeError CodesSamsung Dishwasher Error Codes Lc And Their Fixes

Samsung Dishwasher Error Codes Lc And Their Fixes

If you own a Samsung dishwasher, chances are you’ve encountered an error code at some point. One of the most common errors is the lc code, which indicates a leak in the dishwasher’s system. While this can be frustrating to deal with, there are several simple fixes you can try before calling in a professional.

First and foremost, it’s important to understand what causes the lc error code on your Samsung dishwasher. This code typically appears when water has leaked into the base of the dishwasher and triggered the flood float switch. This could be due to a variety of issues, such as a faulty hose or clogged filters. By taking some basic steps to troubleshoot and fix these issues yourself, you may be able to save time and money on repairs.

Understanding the lc Error Code on Your Samsung Dishwasher

If you’re seeing the lc error code on your Samsung dishwasher, don’t worry – we’ve got you covered with everything you need to know. The lc error code indicates that there is a leak in the dishwasher. This means that water has entered the base of your unit, which triggers the flood sensor and causes this error code to appear.

To fix this issue, turn off the power supply to your dishwasher and check for any visible signs of leaks or damage. If you find any, it’s best to call a professional technician who can help you identify and repair the problem. In some cases, the issue may be as simple as a loose hose or connection that needs tightening.

Once you’ve fixed any leaks or damages, reset your dishwasher by turning off its circuit breaker for at least 5 minutes before turning it back on again. This should clear out any remaining errors and allow your dishwasher to function normally once again. As always, if you’re unsure about how to proceed or if the problem persists after attempting these fixes, it’s best to seek help from a qualified technician who can provide further assistance.

Checking for Visible Leaks

Take a deep breath and check if there are any noticeable leaks. If you see any water pooling around your dishwasher or dripping onto the floor, this could be the reason for the lc error code. The first thing to do is to turn off your dishwasher’s power supply by unplugging it from the wall or turning off its circuit breaker. Then, inspect the hoses and connections at the back of your dishwasher for any signs of damage or loose connections.

If you don’t find any visible leaks, move on to checking other possible causes for the lc error code. This could include problems with the float switch, which detects when there’s too much water in your dishwasher and shuts it down to prevent overflow. You can try resetting this switch by tilting your dishwasher forward slightly so that excess water drains out of its base. Be sure to place towels underneath before doing this.

If these steps don’t solve the problem, it may be time to call a professional repair service or contact Samsung customer support for further assistance. They will have more specialized tools and knowledge needed to diagnose and fix more complex issues that might be causing the lc error code on your Samsung dishwasher. Don’t hesitate to reach out if you’re unsure about what steps to take next – remember, safety always comes first when dealing with electrical appliances!

Inspecting the Water Supply Hose

To thoroughly inspect the water supply hose, you should first turn off the power and unplug your machine. This will ensure that there is no risk of electrical shock or damage to the appliance while you work on it. Once this is done, locate the water supply hose at the back of your dishwasher.

Next, visually inspect the hose for any signs of wear and tear such as cracks, bulges, or holes. If you notice any damage to the hose, replace it immediately to prevent leaks and potential damage to your home. Additionally, check for kinks or sharp bends in the hose as this can impede water flow and cause issues with washing performance.

It’s also important to check where the water supply hose connects to your plumbing system. Look for any signs of corrosion or mineral buildup around the connections that may indicate a leak. Finally, make sure that the hose is tightly secured in place and not loose or wobbly. A loose connection can cause leaks and potentially damage your flooring or cabinets over time. By properly inspecting your water supply hose regularly, you can prevent issues with leaks and ensure that your dishwasher runs smoothly for years to come.

  • Visually inspect for any signs of wear and tear such as cracks or holes.
  • Check for kinks or sharp bends in the hose which may impede water flow.
  • Look for signs of corrosion or mineral buildup around connections.
  • Ensure that all connections are tight and secure in place to avoid leaks.

Examining the Drain Hose

Now that you’ve inspected the water supply hose, let’s move on to examining the drain hose and ensuring it’s in good condition for optimal dishwasher performance. The drain hose is responsible for carrying wastewater out of the appliance and into your home’s drainage system. Over time, it can become clogged or develop cracks that lead to leaks. This can cause issues with proper draining, leaving your dishes dirty and even damaging your floors.

To examine the drain hose, start by unplugging your dishwasher and turning off its water supply. Then, locate the drain hose at the back of the appliance where it connects to your home’s plumbing. Check for any visible signs of damage such as cracks or tears in the hose material. Additionally, use a flashlight to inspect inside the hose for any obstructions like food debris or mineral buildup.

To help you better understand how important it is to keep your dishwasher’s drain hose in top condition, take a look at this table:

Neglecting Drain Hose Maintenance Taking Care of Your Drain Hose
Clogs in the drain hose can cause wastewater backups leading to standing water inside your dishwasher which will leave you with a foul smell that won’t go away easily. Regularly cleaning and inspecting your drain hose will ensure proper drainage so that there are no unpleasant smells coming from inside your appliance.
A damaged or cracked drain hose can result in leaks causing water damage to surrounding areas around your dishwasher. Keeping an eye on any signs of wear and tear on your washer’s hoses will prevent leaks from happening saving you money on costly repairs down the road.
Ignoring warning signs like slow draining could ultimately lead to costly repairs down-the-line. Treating problems as they arise not only ensures longevity but also saves you from unnecessary repair costs later on down-the-line if left unattended.

By understanding these consequences associated with neglecting regular maintenance checks on their dishwashers, owners can take necessary precautions to avoid the errors codes and keep their machines running smoothly.

Cleaning the Filters

Maintaining clean filters in your dishwasher is crucial for ensuring sparkling dishes and avoiding frustrating malfunctions. Here’s how to clean them:

  • First, locate the filter assembly at the bottom of your dishwasher and remove it.

  • You may need to twist or pull a tab to release it.

  • Take note of how the parts fit together so you can easily reassemble them later.

  • Rinse each part thoroughly under running water, using a soft brush or cloth as needed to remove any debris or residue.

  • Pay special attention to the mesh screen, which can become clogged with food particles and prevent proper drainage.

  • Avoid using harsh chemicals or abrasives that could damage the filter components.

  • Once everything is clean and dry, reassemble the filter assembly in its original position.

  • Make sure all parts are securely in place before starting another cycle.

By taking good care of your dishwasher’s filters, you’ll not only improve its performance but also extend its lifespan. Plus, you’ll be able to enjoy spotless dishes without worrying about annoying error codes like lc. So why not make filter cleaning a regular part of your kitchen routine? It’s a small but important step towards maintaining a happy and healthy home environment.

Checking the Door Seal

Ensuring the door seal on your dishwasher is functioning properly is essential for keeping water and detergent from leaking out during a cycle, resulting in a mess that you don’t want to deal with. To check the door seal, start by inspecting it for any visible signs of damage or wear. If you notice any tears, cracks, or deformities in the seal, it will need to be replaced.

Next, close the dishwasher door and run your fingers around the perimeter of the door to feel for any gaps or leaks. If you feel air coming through or notice any moisture escaping from around the edges of the door, there may be an issue with the seal. In this case, try cleaning the area where the seal meets with warm soapy water and then drying it thoroughly before running another cycle.

If cleaning doesn’t solve the problem and you’re still experiencing leaks even after replacing a damaged seal, there may be an issue with your dishwasher’s latch mechanism. It’s best to contact a professional technician at this point who can diagnose and repair any issues with your appliance. By regularly checking and maintaining your dishwasher’s door seal, you can prevent messy leaks and ensure your appliance is running efficiently.

Testing the Water Inlet Valve

To ensure your dishes are getting properly cleaned, you’ll want to test the water inlet valve by checking for proper water flow and pressure. The water inlet valve is responsible for letting enough water into the dishwasher to properly clean your dishes. If it’s not working correctly, this can result in a lack of water or low pressure, which can lead to dirty dishes.

Firstly, turn off the power supply and the water supply before starting any testing on the appliance. Then locate the water inlet valve at the back of your dishwasher. Check if there are any clogs or debris inside that could be restricting the flow of water. If you find anything blocking it, remove it and try running your dishwasher again to see if this resolves the issue.

If there is no visible blockage in the valve, use a multimeter to test it for continuity. You will need to disconnect all wires from both sides of the part before doing this. If there is no continuity detected with an open circuit reading on your multimeter, then you’ll need to replace it entirely. Testing and replacing parts require technical knowledge about appliances; therefore, always contact a professional technician if unsure about something during testing or replacement procedures.

Replacing the Water Inlet Valve

If your dishes are still coming out dirty after testing the water inlet valve, it’s time to replace it and get back to enjoying spotless dishes every time. Replacing the water inlet valve is a fairly straightforward process that you can perform on your own, without needing to call in a professional.

To start, turn off the power supply to your dishwasher at the circuit breaker. Next, locate the water inlet valve, which is typically located at the bottom of the dishwasher behind the access panel. Disconnect any wires or hoses that are connected to the valve and remove it from its mounting bracket.

Once you have removed the old water inlet valve, simply install the replacement valve by reversing these steps. Connect any wires or hoses as necessary and secure it in place using its mounting bracket. Finally, turn on your dishwasher’s power supply and test it out by running a cycle with clean dishes – you should notice an improvement right away!

Testing the Flood Float

Now you can easily test the flood float yourself to ensure that it’s not causing any issues with your dishwasher. The flood float is a small plastic component located at the bottom of your dishwasher. Its main function is to detect water levels in the appliance. If there’s too much water, it’ll trigger an error code, which could be LC or something else.

To test the flood float, first unplug your dishwasher from its power source and disconnect it from the water supply. Then, locate the float switch assembly and remove it from its housing by gently pulling up on it. Once you have access to the float switch, check if there are any cracks or damages on its surface.

Next, use a multimeter set to continuity mode and touch one probe to each side of the switch contacts. If there’s no continuity when you push down on the switch, it means that the switch is stuck in an "up"position and needs to be replaced. Refer to your user manual for instructions on how to replace faulty components.

Here’s a table summarizing everything you need to know about testing your Samsung dishwasher’s flood float:

Step Action
1 Unplug your dishwasher and disconnect it from water supply
2 Locate and remove flood float switch assembly
3 Check for physical damage on switch surface
4 Test using multimeter set to continuity mode

By following these steps and referring back to this table as needed, you can quickly diagnose whether or not your Samsung dishwasher’s error code LC is caused by a faulty flood float. Remember always exercise caution when working with electrical appliances and make sure they’re disconnected before starting any repairs!

Replacing the Flood Float

Ready to get your dishwasher working like new again? Let’s dive into replacing the flood float! The first step in replacing the flood float is to turn off the power supply and shut off the water valve. This will ensure that there is no electricity or water running through your dishwasher while you work on it.

Next, locate the flood float inside your Samsung dishwasher. It is usually located near the bottom of the tub and can be identified by its small size and round shape. Once you have found it, carefully remove it from its position using a pair of pliers or a screwdriver.

Replace the old flood float with a new one and reassemble all of the parts in reverse order. Make sure that everything is tight and secure before turning on your dishwasher again. With this simple fix, you should now be able to use your Samsung dishwasher without encountering any lc error codes caused by a faulty flood float!

Contacting a Professional for Assistance

Don’t hesitate to reach out to a professional if you’re feeling overwhelmed with the process of fixing your dishwasher. While it can be tempting to try and troubleshoot the issue yourself, sometimes it’s best to leave it in the hands of an expert. Here are some reasons why contacting a professional for assistance may be the right choice:

  • They have experience: A professional repair technician has likely seen many different types of dishwasher issues and knows how to fix them efficiently and effectively.

  • They have the right tools: Trying to fix your dishwasher without the proper tools could end up causing more harm than good. Professionals come equipped with all the necessary equipment needed for repairs.

  • They can save you time and money: Attempting DIY repairs can lead to costly mistakes or prolonging the problem even further. By calling in a professional, you’ll likely save both time and money in the long run.

Remember, there’s no shame in asking for help when it comes to fixing your appliances. It’s better to get it done right by someone who knows what they’re doing rather than risk causing more damage. So don’t hesitate – call a professional today!

Preventing Future Error Codes

To avoid future issues, it’s important to regularly maintain your appliance by cleaning the filters and checking for any signs of wear and tear. Cleaning the filters is an easy task that can be done once a month or as needed. Simply remove them from the dishwasher, wash them with warm soapy water, rinse thoroughly, and put them back in place.

Another way to prevent error codes is to load your dishwasher correctly. Overloading can cause dishes to block spray arms and prevent proper cleaning. Be sure not to stack items too high or cover up spray arms with large dishes. Also, make sure that all dishes are properly spaced apart to allow for proper water circulation.

It’s important to use the correct detergent for your dishwasher. Using dish soap or another type of cleaner can cause excessive sudsing which can lead to error codes lc and other issues. Always use a detergent specifically designed for dishwashers and follow the manufacturer’s instructions on how much detergent to use per load. By following these tips, you can help prevent future error codes and keep your Samsung dishwasher running smoothly for years to come!

Frequently Asked Questions

Can the lc error code be caused by something other than a water leak?

Yes, the lc error code on your Samsung dishwasher can be caused by other issues such as a malfunctioning motor or drain pump. However, it’s important to thoroughly inspect for water leaks before assuming another problem.

How do I know if the water inlet valve needs to be replaced?

To know if your water inlet valve needs replacing, check for signs of leaks or blockages in the water supply line. If there’s no water flowing into the dishwasher, it may be a sign that the valve needs to be replaced.

What are some other error codes that my Samsung dishwasher might display?

If your Samsung dishwasher displays error codes, they may be related to issues such as drain problems, water supply issues, or malfunctioning sensors. Consult the user manual for specific codes and troubleshooting steps.

Is it possible to fix the lc error code myself without contacting a professional?

Yes, it’s possible to fix the lc error code yourself without contacting a professional. Check your dishwasher’s manual for troubleshooting tips or try resetting the unit by unplugging it for a few minutes.

How often should I clean the filters in my Samsung dishwasher to prevent future error codes?

To prevent future error codes in your dishwasher, it’s recommended to clean the filters every 2-3 months. This will ensure that debris and food particles don’t build up and cause blockages.


In conclusion, dealing with an lc error code on your Samsung dishwasher can be frustrating, but there are several steps you can take to resolve the issue. First, check for visible leaks and inspect both the water supply and drain hoses. Be sure to clean out any filters that may be clogged as well. If the problem persists, test and potentially replace the flood float.

If these steps do not solve the issue or if you are uncomfortable performing them yourself, it is always best to contact a professional for assistance. They will have the expertise needed to diagnose and fix any problems with your dishwasher quickly and efficiently.

To prevent future error codes from occurring, make sure to properly maintain your dishwasher by regularly cleaning it and checking for any signs of wear or damage. With proper care and maintenance, your Samsung dishwasher should continue to provide reliable service for years to come.

Leave a Comment

Stella is the founder and chief editor of getdishwasher.com. For the last decade and a half, Her aim for this website was to help people make the right decisions for their dishwasher component upgrades.

Like it? Share it!